Hi,
This is the view from a high resolution monitor (3840x 2160)
I can affect most icons and text to be readable, but:
how to set a proper user interface?
AECOsim SS6 ( 8.11.09.863 ) win10
Regards
Marc
Rik
Marcs advise was good for me as you can follow in another thread. Search for YOGA in this forum.
But I have also tested a Benq 3201PT with 3840x2160 pixels.
And so far I have not changed any setting.
regards / Thomas Voghera
Ric/Marc, FWIW this wiki was created based on Development feedback to this question. communities.bentley.com/.../20128.blurry-dialogs-in-windows-8-8-1 HTH, Larry
This is a screenshot from my BENQ screen - was ok from start after enlarging the Icons in BD.
But on W7 ! not W10.
I have two 4k monitors and the same hastle. If you use windows to change setting to 125, 150, 200% it causes other issues on other programs and a lot in MS. I have find better results with some setting over others but went with 150% as it was the best for me 200% looked better but things did not work at all in MS Then I adjusted all the settings for Icons in MStation Then I had to adjust things for the cursors as well I am NOW OK but would like the icons in MS to be larger than I can make them. The simple is that the % changes in Windows does not affect all things and can actually break things as we have known for some time To make windows work it can take more than the % change The solution is for MStation to offer more ability as it needs to address the modifications to its program in a relationship or sizes for the new monitors.