Tech assistance requiring AECOsim : Slicing levels from a merged model

Question

We require an urgent tech support for a query in AECOsim as we are finding difficulties to segregate individual levels from the merged AECOsim model. We just need to segregate individual levels from the entire model consisting of 5 levels as shown in the snap.

Can somebody suggest a solution to the same so that we may output DWG/PDF of individual levels.

stan.white · Answer

When you want to separate levels in an AECOsim model for export to DWG /PDF format, that process is fairly simple. First, with the model open, you can do a file “save- as” then from the pop-up menu, select the DWG option, so you will have a DWG drawing you can work with. Then start turning off the levels that are not required, until you get the desired results. 
 
Another way this can be accomplished in AECOsim is to select any element in the model, then right mouse click, and from the pop-up menus select “Level Off” this will turn off all the elements that are on that particular level, then repeat his operation for all elements/levels you don’t want to be visible. 
Then once this is done, do a file “save-as”, then from the menu selection select DWG.