AECOsim Dynamic view sections from structural elements don’t cap when opened in Microstation. Is this the standard behavior?

Question

DVs sections from ABD of a structural element like a slab it doesn&rsquo;t cap the cut face when I open and activate the section callout in Microstation. 
 I&rsquo;m not expecting to see unifications / hatching (or other fancy stuff) because I know Microstations doesn&rsquo;t have Building Views and dataset family & parts like AECOsim 
 Just wondering if the described behavior is standard and not a problem with my setup. 
 
 See screen caps 
 
 Thanks 
 Regards 
 Gilberto

Gilberto Pires · Accepted Answer

Hi Marc, 
 
 Thanks for your answer but you really didn&rsquo;t answered my question. 
 I know about element templates (they also available in AECOsim) and I know (in the 2D drawing) that if you cache your views then it will show exactly the same in Microstation that&rsquo;s old news to me that&rsquo;s why my example is a cut out section activated in the 3D model. 
 Also thanks for quoting me&hellip; 
 
 Regards

AECOsim Dynamic view sections from structural elements don’t cap when opened in Microstation. Is this the standard behavior?

Top Replies