export to dwg - some help with the settings

Question

I Have a file with: 
 
 Drawing Model: with external references attached; 
 Sheet Model: with the internal Drawing model attached, as well as soms external references.

The desired resulting dwg-file should be: 
 
 model space: the Drawing model with all references merged; 
 paper space: all external references merged, but the Drawing Model still a reference.

That way I have a file with no external references, but keeping the internal references as references. 
 I have done this before, but seem to struggle to do this again, any help on the dwg-export settings?

Anik Mal · Answer

Hi, You might find this wiki helpful. Save - DWG - MicroStation . Please have a look.

David Trejo-Rodriguez · Answer

Regarding the settings in the save as DWG dialog you can reference the following articles: 
 https://communities.bentley.com/products/microstation/w/microstation__wiki/8870/merging-reference-files-during-save-as 
 https://communities.bentley.com/products/microstation/w/microstation__wiki/2827/2827

Marc Thomas · Answer

Please can you post the settings that you used in V8i so we can make a comparison. 
 In the meantime does setting 'Non-Default Design Models' to 'Create Paper Space' help?

export to dwg - some help with the settings

Top Replies