Grid Lines with Bubbles - Moving back to original locations

I am constantly having to redo the layout of the column bubbles on my plans.  they are set as I'd like them and then they tend to reset.  I do have the plans "Cach" updating when I open to work in a file but sometimes they stay as they were and then sometimes they don't

Parents
  • I place them in hte plan - they change back to where they were (Dimensions and bubbles)  then some stay and some move.  NO WYSIWYG.  The auto dimensioning is totally bad and I am having to redo them over and over just to get one plot of a plan - never have to do this if I just dimensioned the old fashioned way.

    Ustn since 1988
    SS4 - i7-3.45Ghz-16 Gb-250/1Tb/1Tb-Win8.1-64b

    Eric D. Milberger
    Architect + Master Planner + BIM

    Senior  Master Planner NASA - Marshall Space Flight Center

    The Milberger Architectural Group, llc

Reply
  • I place them in hte plan - they change back to where they were (Dimensions and bubbles)  then some stay and some move.  NO WYSIWYG.  The auto dimensioning is totally bad and I am having to redo them over and over just to get one plot of a plan - never have to do this if I just dimensioned the old fashioned way.

    Ustn since 1988
    SS4 - i7-3.45Ghz-16 Gb-250/1Tb/1Tb-Win8.1-64b

    Eric D. Milberger
    Architect + Master Planner + BIM

    Senior  Master Planner NASA - Marshall Space Flight Center

    The Milberger Architectural Group, llc

Children
No Data