Good Day!
I facing some issues with the Cut Solids which was used for some element creations. The same has been checked in Navisworks Manage by importing an IFC file of that. I can see the curves/user cuts etc. in that file.
Attached below are the snippets that exactly showing the issues.
Image with out Cut solid
Image with All levels are turned on (Cut solids)
I would you appreciate for a prompt response to get rid off this issue in easiest way. Thank you very much.
Cheers,
Balaji G
Please can you give us more details about this, including software version and more about the sequence of operation that led to this result?
How were the solids initially created?
Marc
Hi Marc,
These are solids (wall panels) are created using tools "Form Modelling (as per the project requirement/BEP this only allowed to use)" from AECOsim BD.
The software versions are,
ABD V8i SS6 08.11.09.866
Autodesk's Navisworks Manage 2018 (This used to verify the models for Clashes and other issues thru .iFC & NWD files)
CDE is ProjectWise Connect Edition.
Hope this will give you an idea to the above.
Let me know in case of any other information that you required. Thanks.
Please can I have a solution ASAP.
Hi Marc / Dear Subscribers
Did you get a chance to look on the above issue?I am wondering!
PS : above is regards to the issue from the Form Modelling
Regards
hi Balaji,
Do these curves appear in other IFC viewers also?
Attaching snapshot of my simple test case below.
Best Regards,
RJ.