I have a part which has a fill (solid grey) and pattern defined in the Cut settings. I notice now in a drawing with a Saved View from my 3D model attached, on some elements the pattern doesn't show, only the solid fill shows. The elements are Walls. Previously I didn't have this problem on the same elements, as seen in the 1st image (screenshot of a pdf I created back then). I didn't change anything to the Saved View, and it's still attached to the same Drawing as before. I didn't edit these elements either, so basically nothing really changed. I have other elements with the same part in this Saved View, the pattern only disappears on 3 of them, the other elements are fine.
What I noticed:
I know I've had this problem in the past too, even in the SS-versions and not only in Connect. This is why I don't often use the option to use a fill + pattern, but now I have to. It's been acting fine till now on Connect. I'm not sure if the pattern is gone, or getting behind the fill?
Anyone else experienced this?
*************************
EDIT: I notice all the elements it happens to are in the same reference model (the SV is defined in a container model, in which 10 models (1 for each floor) are referenced).
************************
Bonjour
J ai remarque pendant la partie graphique si utilisation de la fonction miroir nous avons le problème.
J e redessine le problème disparu
Guy Foussadier said:J ai remarque pendant la partie graphique si utilisation de la fonction miroir nous avons le problème. J e redessine le problème disparu
J ai remarque pendant la partie graphique si utilisation de la fonction miroir nous avons le problème.
J e redessine le problème disparu
"I noticed during the graphic part if using the mirror function we have the problem.I redraw the missing problem"
Interesting, Stefan, are any of your walls mirrored?
Marc
It could be possible for some of them, but definitly not all. It's always all walls from one model, so it's not limited to some.
Windows 10 pro
OpenBuildings Designer Connect Edition 2023 | 23.00.00.114
Try the Schema Update Utility on that file, perhaps it is out of sync with the dataset?
I'll give it a try, and see if it still shows up. I had it on 2 different files last days, so chances are it would show up again.
EDIT: May I ask, is this mostly important on all 3D Design files, or also on the Drawings and Sheets with Saved Views attached to them?
3D design files that contain OpenBuilidngs Catalog elements. drawings and sheets contain only 2D element and references from the 3D models.
Upgrade existing elements and their properties to the current Catalog Schema
Thanks, also for the link, this makes things clearer what this does.
I've done it on all these files, and also compressed all of them (since some seem to be very large for no reason).
Still no difference after running the DG Upgrade utility and compressing?
So far, the problem didn't show up anymore, so fingers crossed these did the trick.
Well, that's good news!