I've started working through the Quickstart Architecture training and ran into trouble. The doors and windows are not cutting through the gyp board layer of the compound wall I've adjusted the sense distance to be larger than the wall and it still isn't cutting. If I place the window in the opposite direction it works fine. I searched the forum for a clue but didn't see an answer. Can anyone offer any advice? Sorry for such a basic question.
Can you please mention which Compound wall you are using? Also, please share the DataSet you are using.
I experimented a little more and I can only recreate the problem when using the TrainingTemplate_US. The other metric or US worksets I've tried work fine. Hope that helps narrow down my problem.
Thanks, John and Tony. We've now filed Defect 1062371 against this. The core issue is the perforator itself is being "locked" at a value of 1', so any wall layer thickness greater than 1' within the Compound Wall is preventing the opening from be created in subsequent wall layers. If that makes sense.
If you can please file a Service Request so we can link them to the defect - strength in numbers.
Thanks Steve and Tony. I always tell my team, 99% of the time the problem is a user error. This must be the 1%. I'll file a Service Request.
Thanks John and Steve.
Lets hope for a speedy fix. I can assure you there are other bugs. I shall collect the ones I have found and post them at a later date.
You're welcome. Development is already on this one so it should definitely be resolved in the next release.
I am seeing a note that Version 7 is ready or has been released. Could you confirm where we are on this one?