AECOsim Building Designer SS6. Version - 08.11.09.829
Below is a complete model of 3D Stairs
I have applied a section callout from the sheet model as shown below:
But unfortunately, my handrail objects and levels (S-G34-M_HandrailPanel) are not displaying in the resultant drawing as shown below. However, i have checked the level S-G34-M_HandrailPanel is set to display in all views.
Has anyone ever experienced this? if so, please share your solution with me
This appears to be caused by a combination of working outside the SWA and using a MicroStation seed file with too low resolution (AECOsim requires 1000UOR/mm). These issue affect complex geometries such as small diameter tubes more seriously than simpler objects, please see our response to your SR for more detail and our test files.
Thanks for that.