How to cut radial section

Hi everyone 

Please share if you know how to cut a radial section in aecosim building designer.. 

Best regards 

Muhammad Ismail 

Parents
  • I'm assuming that you would like a section that follows a curve?

    The Callout Tools currently only cut planar sections. We have an existing enhancement request 488731:"Users require a practical method to create faceted or developed elevations from non-orthogonal facades or along infrastructure system centerlines or other alignment lines".

    If this is what you need please file a service request referencing this enhancement number.

    It is possible to create a clip volume in a 3D view using a curved profile, then create saved views for manual placement on sheets, while these cannot be unfolded /unrolled to flat representations, they do offer true elevation views of the cut plane.

    Regards

    Marc

Reply
  • I'm assuming that you would like a section that follows a curve?

    The Callout Tools currently only cut planar sections. We have an existing enhancement request 488731:"Users require a practical method to create faceted or developed elevations from non-orthogonal facades or along infrastructure system centerlines or other alignment lines".

    If this is what you need please file a service request referencing this enhancement number.

    It is possible to create a clip volume in a 3D view using a curved profile, then create saved views for manual placement on sheets, while these cannot be unfolded /unrolled to flat representations, they do offer true elevation views of the cut plane.

    Regards

    Marc

Children