https://communities.bentley.com/products/building/building_analysis___design/f/aecosim-speedikon-forum/206657/gridlines-and-more-then-1-buildingI have a drawing (planview) gridlines for the right building (IL-*) are showing correct, but also the grid lines from an other accompanying building (DC-*) are showing up in the drawing In the 3D file, only the correct grid for the building is selecteden-USTelligent Community 12https://communities.bentley.com/thread/623381?ContentTypeID=1Fri, 04 Dec 2020 15:32:58 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:5801ced0-83a5-4cf0-889f-0575b6c3cb03Marc Thomas<p>That is correct, as long as the view is not switched back to Dynamic at any point.</p> <p>That&#39;s a good workaround.</p><div style="clear:both;"></div>https://communities.bentley.com/thread/623369?ContentTypeID=1Fri, 04 Dec 2020 14:04:29 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:170fa215-ffb5-4ccb-8a6c-83692bcf04abdominic SEAH<p>As a workaround, if you are using CVEs, you could hide the unwanted graphics. I think that the hidden elements stay hidden on reload. </p> <p></p><div style="clear:both;"></div>https://communities.bentley.com/thread/623317?ContentTypeID=1Fri, 04 Dec 2020 08:52:51 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:c3fb50e5-c460-4216-af94-0b07baeb8774dominic SEAH<p>Option to define separate levels for the different buildings?</p><div style="clear:both;"></div>https://communities.bentley.com/thread/623130?ContentTypeID=1Thu, 03 Dec 2020 10:26:52 GMT6dad98f5-dbc9-4c4d-a9ba-e9da8dc6aa8e:5bba471d-8270-46ad-83f5-eb257b58a5deMarc Thomas<p>Hi Rik, we are looking into this after an similar question last week, the standard answer is a separate workset for each building but we are aware that this does not always fit peoples needs, we will report back here as soon as we can.</p><div style="clear:both;"></div>