How do I change the Unit System in Duct Sizing dialogue?
The option is greyed out as shown below in the screenshot.
Hi Lewis,
Unit System in Duct Sizing dialog sense the unit system of design file. So depending upon what unit system sets for DGN file, you will see corresponding option selected.
So changing unit system of DGN file will give you desired result.
HTH,
Rg,
Sandeep
Answer Verified By: Lewis Clark
Hi Sandeep,
Thanks, that sorted my problem. I previously tried changing the DGN file units in the settings but this did not change the unit system in the Duct Sizing dialogue. However, when I tried this morning it did.
Thanks, Lewis