I have created a custom set Part & Family's and also a DGNLIB with all the matching levels required for each family part.
But when I open the "Family/Part Editor" all the family part have "(Non Existent Level)" behand them but the levels are present in the file from the DGNLIB
Using OpenBuildings Designer Update 8
Hi David,
What is your DGNLIB called?
The default values for variable MS_DGNLIBLIST_LEVELS are set to Levels*.dgnlib, any DGENLIB in these locations whose filename follows that pattern will be included. Other filenames will not.
The design intention is that DGNLIBS can be used for their intended purpose via their name without configuration changes.
Marc
The issues is not the DGNLIB, but the DGNLIB files name is "Levels_ONYX.dgnlib"
I can see in the level library in the Level Manager, but the levels are always (Non Existent Level).
The only time the level is correct in the list is if it has been an active level.
Has this been addressed?
If the Level is located in a loaded dgnlib defined by MS_DGNLIBLIST_LEVELS it should not show as Non-Existent. I am seeing this in the latest Update 9 version.
No. Not in U9 anyway
Just when I thought I had things sorted.
Does anyone have an SR number for this?
Service Request number 7001500620
OK, a bit to update:
We agree the 'non-existent level' needs better labelling.
The lack of colour when using 'bylevel' needs to be fixed.
Hope that helps anyone else coming across the issue.
Answer Verified By: Alifur Mandal