Perspective behavior without control

After having been a straight forward command with direct feed-back on mouse dragging, something has happened to the settings. Camera is on in view setup but the whole model “disappears” into a distant spot. Zooming in several times takes the model back to previous look but there is no perspective alteration as wanted. Is it something about the 1-, 2- or 3-point perspective? Ingemar

Parents
  • Thanks Alifur,

    Your suggestion worked! Although I hadn't assigned a clip volume in this project the clearing command changed the perspective performance - magically. However, the really exaggerated distortion one can do just to see the limits does not happen. Somewhere there are limits applied and the perspective returns to original state. For now, a reasonable effect is fine for me but another time an unrealistic 3D effect might be just wanted. If you happen to know abut those limits, please get back to me,

    Greetings, Ingemar

Reply
  • Thanks Alifur,

    Your suggestion worked! Although I hadn't assigned a clip volume in this project the clearing command changed the perspective performance - magically. However, the really exaggerated distortion one can do just to see the limits does not happen. Somewhere there are limits applied and the perspective returns to original state. For now, a reasonable effect is fine for me but another time an unrealistic 3D effect might be just wanted. If you happen to know abut those limits, please get back to me,

    Greetings, Ingemar

Children