OpenBuildingsDesigner CONNECTEdition Update 4. Version - 10.04.00.69
ProjectWise Connect 10.00.03.334
Hi All,
I am currently working inside ProjectWise. Using the default AECOsim PDF plotter, I have printed the drawing shown below to PDF but unfortunately the line weights from the actual drawing does not come through.
See PDF output print below
Also, I have attached the default AECOsim PDF configuration plotter below
7144.pdf.pltcfg
Can someone please provide me a PDF.pltcfg file that plot line weights
Thank you
Henry
Hello Henry,
Can you please tell us whether the drawings that are referenced in the sheet are in dynamic view or in cached view. You can get an idea of the visible edges settings by going in the reference hierarchy. Also can you please share the files so that we can try check the prints on our end.
Regards,Alifur
Hi Alifur,
Man thanks for your time yesterday on my previous SR. In response to your query, all drawings referenced into the sheet are in a cached view and just to let you know, this issue is not document specific but general. It occurs on all documents I print/plot.
Meanwhile, the ProjectWise document (drawing) you have asked me to send you is 133MB so, can you provide me an FTP for upload?
I look forward to hearing from you
Regards
Hello Henry, Always happy to help. Can you please share your files in this link (https://bentley.sharefile.com/r-r116abcccbc7243a79064cc15a3fd3282).
thanks for the link. All uploaded now