Before I log a call for this, but has anyone else had errors like this with mirrored PS members in OBD?
Thanks,
Can't say I'm seeing anything similar to what you're describing, Sean.
Thanks for confirming, Tuan
I'll put something together and upload it.
Sounds good. Thanks, Sean.
This is 10.08.00.44.
Original member on the right.
Left member is a mirror\copy of the first.
Use Modify Member End and, as you can see, the member rotates.
I have tested vanilla in newer versions and this issue does seem to be resolved.
I'll do some more testing and get back to you.
It's good to know that Update 10 does seem to resolve the issue, at least in your initial tests. Let us if you see anything different along the way.
Same issue noticed on U8. mirrored PS members change the rotation of the profile when manipulated.
Windows 10 pro
OpenBuildings Designer Connect Edition Update 10.10.01.151
Hi Stefan,
I have checked U8 [and Update 10 also] and tried mirror-copy of PS element and I can see it showing mirror copy properly.
See image below
Do you see issue with any specific member ?
Possible to share dgn with problem element ?
Thanks and Regards,
Sandeep