SmartLine has changed color to red. In the p roperties it shows as locked. I select unlock and it will not unlock. How can I unlock the line?
Hi Gina,
Can you please share the problematic DGN file with us? We will have some testing on it and will let you know about our findings.
Regards,Sayan Acharyya
Yes this is a training model I am working on. New to Bentley Connect. I was practicing with Accudraw when it happened. The lines are off to the side of the model in Top view. The red ones are locked. Thank you for your help. Is there a place to upload a file?
Sure, you can upload the file here. When you are replying in the forum there is an option called "Insert" please click on that and then go to Image/video/file option to upload the file. Please refer to the screengrab below for reference.
HTH!
trying to upload the file but it was marked at spam. Am I sending the link to a onedrive or uploading a file?
No worries!! I have received your file and below are my findings.
When I opened the file and opened the Properties of the line you mentioned I can see that the line is "Unlocked". Please refer to the screengrab below.
After that I chose the line and opened the Level Manager and changed the color of the line to say- blue for example and the process was successful.
Can you please try the same at your end and let us know about the outcome?