Sheets

I've gotten to the point where I'm trying to print using sheets. The project I'm working on is to big to show the full floor plan on one sheet. So I broke it up into different sheets. Where the fence clips some walls off I now have a line that goes from one clipped wall to another. Seems as if it automatically placed a break line. In the model there is no line there though.
Parents Reply
  • emilberger:
    This sould be valid for referencing BV or CV's also.

    True.  If you're clipping reference files I don't think you should be seeing any extraneous lines, whether it's an extraction or a DV. 

    However, if you're creating individual DVs (or extractions) and the cut plane is falling across elements at the extent of the DV/DEM area, then we will generate graphics to represent those objects being cut across.   That's to be expected.



Children
  • I don get that wild line on a BV every now and then.  it it a ine that goes forever.  but I've checked and when that ahs occured it also happened with an DEM also.  And I would have to find a random element to delete from the model.

    Ustn since 1988
    SS4 - i7-3.45Ghz-16 Gb-250/1Tb/1Tb-Win8.1-64b

    Eric D. Milberger
    Architect + Master Planner + BIM

    Senior  Master Planner NASA - Marshall Space Flight Center

    The Milberger Architectural Group, llc