Adjusting Hollow Metal door heads

I need to modify the head of a hollow metal door to be 4" without adjusting the rest of the frame. I am not sure if this needs to be done in PCS or in Bentley. When in bentley, if you double click on a door it gives you an option to adjust the frame thickness but that adjust the whole frame. I need to only adjust the head of the frame and leave the jambs at the default width. Any suggestions on where to modify and how to modify would be great.
Parents
  • Hi Josh,

    accidentally (actually by lack of knowledge) I discovered a thrilling feature of PCS. That is, a profile (such as door frame with shadow gap) needs not to be a closed loop as long as the 2Dpath has a thickness > 0. It can however be swept along a path. This allows for  quiet complex door frame geometries.

    Regards, Andreas

Reply
  • Hi Josh,

    accidentally (actually by lack of knowledge) I discovered a thrilling feature of PCS. That is, a profile (such as door frame with shadow gap) needs not to be a closed loop as long as the 2Dpath has a thickness > 0. It can however be swept along a path. This allows for  quiet complex door frame geometries.

    Regards, Andreas

Children