wall attach to roof

RE: wall attach to roof

Sandeep Punewar — Mon, 09 Aug 2021 06:26:48 GMT

Dan,

You can use 'Adjust Top' command in order to achieve above result.

Please find online help here 'Adjust Top (bentley.com)'

HTH,

Best Regards,

Sandeep

RE: wall attach to roof

Dan Rotari — Sun, 08 Aug 2021 19:30:22 GMT

is this information still relevant after 12 years?

Re: wall attach to roof

André Scherpenisse — Fri, 18 Dec 2009 12:32:50 GMT

I would like to add this: although the name of the tool is "connect", the walls do not stay connected to the roof (the form or shape above). This is a functionality I have been asking for many times in the past, nobody listened. This could be a huge timesaver!!
HTH André

Re: wall attach to roof

Eric Milberger — Thu, 17 Dec 2009 20:21:33 GMT

This part of the prodect does not work well and needs to be improved.

Make sure simple things like cuts in the wall are not impeeding your desired effect.

for many cuts to roof I've hadto think of this like l am buidling it. Many walls I extrude a wall to the exact height as CMU does not cut to a sloped roof for exable but stops at a perceived height.

If I have sloped tops to represent wood I might have to top each wall to a line.

BUT there are times when walls are too sloped and with the walls at angles or curves you must extedn to form above. This does not always work but many times it is because of somehting simple line a cut in the way. Make sure the wall has not cuts AND is lower in height than the ENTIRE form above.