If you use a "shape" to define an extraction in the DEM, how do you come back later and modify the shape. It appears you have to delete it and then recreate it? We have about 50 of these setup.
Thanks in advance,
Brian Thomas
Selser Schaefer Architects
Brian: we have found that you have to do ONE and ONLY ONE undo after the fact to get the shape to come back.
We've always asked for the ability to use a Referenced Shape as our Extraction requirement, so we could use a reference model full of shapes, but to no avail.
Thanks,
Shawn
------------
Brian Thomas, AIA, LEED AP BD+C
GH2 Architects