Is there any way to change the orientation of the wall after setting it out?
With "orientation" I mean the reference line of the wall. E.g. changing it from orientation "left" to "senter" or "right".
Andreas:
There is a Modify Form Orientation tool in the Modify Forms toolbar that allows you to change the baseline side of a form.
HTH,
Travis
Andreas,
Have you tried the Modify Form Orientation tool.
It is in the Architecture tab under generic forms->modify forms toolbox->Modify Form Orientation
Tom
As far as I can see it does allow me to change from left to right base, but not to centre.
Filed CR 8001069512