Hi all,
I seem to be having trouble with my saved views when setting up 2d drawings in Bentley Architecture. I don't use 'sheets' or 'drawings', but rather set up a dynamic view in my reference model (with all floors, structures etc referenced in), then open a new 2d drawing and reference in the saved view from the model and any other 2d info i need (such as titlle block, notes etc.). The problem i am having is that i can't seem to turn off levels via live nesting which seem to be 'cut' by the saved view. I switch the levels off but they remain in the drawing (and print) and in some instances i can no longer select them but see them. So for eample i don't want to see my whole wall build up in plan and need to switch off my 'linings' level (i am not using compound walls). Futhermore, with our engineers drawings referenced in, there seems to be 'hang over' information which i cannot isolate of turn off without turning off the entire reference (again through live nesting). Is there a check box i am over looking? I have tried numerous combinations of the dynamic view options and presentation options via the reference dialog box, all to no avail. If anyone can help i would be much obliged.
Thanks in advance,