Why does the datagroup catalog editor show those strange units?
I tried this my end , but I'm seeing proper units while creating a new catalog Item/ Type.
Can you please check by creating a new Destination file ? , since units setting gets enabled when you create a new destination file .
Guess you might be using some existing destination file ...
I do use an exisiting destination file - "NODE_Structural.xml".
The screenshot below shows both the dialogue box for a new item, and the start of the destination file.
'It suppose it doesn't have any negative effect other than the disconcerting appearance of ft/in (though grayed out) in a metric file. '
Indeed it is 'disconcerting' ...... though fortunately in the case presented by Andreas, it's perhaps not too big a problem. I assume you're using a metric dataset Andreas.
I'd like to chip in there then ...... this is symptomatic of the problems with the Dataset/Datagroup Catalogue for U use at any rate. I've used about 4 or 5 version of the so-called UK metric dataset. Problem is much of it is basically just an imperial Dataset. You get 25.4 mm and all sorts of other sizes that are essentially imperial sizes that have just had the labels changed to metric. This really isn't on. This product (BA) several times now as a 'ready for production use' product, with a 'metric' dataset, which basically is NOT a metric Dataset at all. Sorry guys but this is simply unacceptable. First ever time maybe it was an oversight, but repeatedly ,,,,..... that's just plain negligent and sloppy.
Try demonstrating this 'great new software' to your boss, and things keep popping up that are basically not the standard/expected sizes for general architectural use. Your boss will not be interested in wasting much more of his/her time on this 'demonstration' for much longer.
It's very disappointing that Bentley/BA Team are not picking up on these relatively 'low hanging fruit/easy wins' type things.
In relation to other discussions re other so-called BIM software, we need to get people over the first 2 or 3 hurdles quickly and easily, to get them 'up and running' so to speak with regards from moving on from 2D drafting to modelling>analysis>production information.
Anyway ....(Andreas, apologies for jumping in ...... but really, come on Bentley, please, if we have selected metric, ..... could we actually get 'real-world' metric ....... please!)
Freelance AEC CAD/BIM Technician ..... (& ex Low Carbon Consultant, ..... because they weren't that bothered!)
AECOSim SS6, Windows 7 Pro, 64 bit, HP Z600 3Ghz, 12Gb RAM, ATI R9 290 4Gb, ect,
Hi Danny... point taken.
I've never been all that involved with the regional datasets much myself, primarily because most of the users I've worked with were here in the US. However, AFAIK there is a concerted effort to bring the metric datasets into ABD in more organized and complete fashion. If you have the opportunity, it might be worthwhile checking out the current Uniclass dataset to see how it fares in comparison.
No problem .....
From what I can tell the latest UK Uniclass Dataset on the Bentley web site is dated the 02 June 2009 (from about 2 and a half years ago). I already have that one .... which sadly is littered with the issues I've mentioned
.......2 and a half years (actually a few more as the previous Datasets were similarly not appropriate) is way too long to be having to fiddle around 'fixing' your Dataset
This information is not something that is obscure. Bentley could easily find this out by having some discussion with the various professional institutions and professional bodies ......
This was one of the main reasons my interest in BA dropped off.
Here's that déjà vu feeling again.
And here are my proposals...again.
I support Andreas suggestion.
A big ISO-only button at installation would be fine.
regards / Thomas Voghera