Changing Global Origin in models effects??

Good question...   The obvious result is that the Z elevation coordinates for those 30 models should read 300mm greater than they are now.  However, I've never personally looked at how that interacts with the FloorMaster file.  I would try backing up that file, then also changing the GO in the working copy to match up.

Of course, if anyone has first-hand experience in doing this that would be best.   :)

I forwarded this on to a colleague that was just looking at a similar situation a couple weeks ago to get his thoughts on it.  That experience would make him the one that has "first-hand experience".  I think he is on-site this week, but I am hoping he might have an opportunity to chime in.

-travis

I'd like it simple based upon what I need in drawings.

For Plan and Section

Workable Origin (don't care what it is) and draw my building

Then move my global and the floor follow (Now I can show true elevation markers on my Sections and Plans)

Create a new "Global Master Model" which hold my original "Master Model" (Confusing isn't it)

Move this to a global loacation and rotate this "Global Master" to match origin of the Universe -

You pick Federation, Klingon or Romulus Coordinate system as you wish.

Steve, when you say change the GO to accomodate real world coordinates, I am unclear as to what you mean.

I thought moving the GO did NOT move the Solids Working Area or the Design Plane. If this is the case, then moving the GO away from the center of the SWA could generate problems in solid modeling especially if beyond the edges of the SWA... Or I would have to enlarge the SWA but loose some accuracy in the process... confusing as usual with Bentley. I am having this problem right now on a real project and I am looking increasingly at moving the geometry to 0,0,0 rather than use the GO which seems to solve nothing. (my survey is currently 32km away from the 0,0,0 - I have a units setting meters/mm/10000 per mm resolution so the SWA is 420m approx.)

For me, "moving the GO" simply means assigning specific coordinates to a designated location.   So instead of the SWA center being 0,0,0 it could be something like 20000, 20000, 0.    You would still be modeling within the SWA, but would also see real world coordinates based on the project's location.

Geo-referencing/coordination takes this a step further by aligning coordinates across multiple files/disciplines.  It's certainly not something I work often with myself, but it seems to be the preferred workflow AFAIK.   Further information can be found here:

http://communities.bentley.com/products/microstation/w/microstation_v8i__wiki/geographic-coordinate-systems-fundamentals.aspx

http://communities.bentley.com/products/microstation/w/microstation_v8i__wiki/geo_2d00_coordination-with-microstation.aspx 

http://communities.bentley.com/products/microstation/w/microstation_v8i__wiki/georeferencing.aspx

This section covers the interaction between Geographic Coordinate Units and Model Storage Units so also may be of interest:

http://communities.bentley.com/products/microstation/w/microstation_v8i__wiki/5898.aspx

OK thanks Steve, also i am told there is a mdl "swa.ma" that highlights the SWA, but I haven't got this in either AECOsim or Microstation files... Any chance to get it for download? Cheers.

Please ignore, I found the mdl since posting thanks.

Yes, I totally forgot about that.  It is a good visual indicator.

Yes, I totally forgot about that.  It is a good visual indicator.