Anyone have any idea why TFWALLS would not load (or be allowed to load) in a custom AECOSim workspace...obviously I've missed some variable, but I don't see it.
Thoughts are appreciated.
this is preventing an implementation, and not allowing walls and other items to be placed at all. Help!
Thanks,
Shawn
------------
Sean,
Did you get to the bottom of this.
I'm gradually getting to the bottom of our customized config but feel is that the configuration is much more complex and also more fragile.
Its also frustrating that a lot of variables appear to be repeated in either a BB a TF or a ATF context with no real evidence of which to use, whether they are interchangeable etc.
Rob
Worth noting, it works fine within the default install.
Just installed ABD 81109361.
Can draw walls.
Also in an old SWEdataset I installed.
regards / Thomas Voghera
I was using 08.11.09.376. Not able to draw walls, but was in previous build (release)
Please post the msdebug.txt which could help us identify the issue.
Thanks
Pradnya
Ian.
Have you been using .225 or the refresh build .325 before this?
BuildingDesigner.cfg was substantially re-written at .325 so that you didn't have to edit it, because in .225 it always forced the US space as the entry point.
Its found here.
C:\Program Files (x86)\Bentley\AECOsimBuildingDesigner V8i\AECOsimBuildingDesigner\config\appl
My recollection is that because I knew I had worked on BuildingDesigner.cfg I swaped out my edited version when I installed .325 and the problems you are experiencing ring a bell.
I will give it a go tomorrow. Thank you
I'm going to trial an install tonight on a sacrificial box - I'll keep you posted on the results.
Well I have no problems with what I would call a highly customized system here.
I owe a debug, I'll get that up soon. New job, so not a lot of time.
We'll try the .325 as well.
If anything, I would recommend .376.