Centerline Definition of Part not working.

Two Issues:  See the attached.  ther Brown Rectagles and an "X".

ONE:

The section is a wt of 3.  If I toggle on the Centerline the Section takes the Part symbology of the centerline at 0.

 

TWO:

The Width to wall and Scale do not work.  This has worked before but still does not here.

 

This is what I have when centerline is on :

This is what I get when Centerline is off (correct wt on Section ) and what I drew in 2d is what I need. (On Right)

I have noticed that one insul might scale and the other might not.  Is it jsut a setting in the linestyle?  I have scal checked on.  The Original "C" is 1SU x 1SU and the length is good in this section just not the width.