Project SWA + Resolution Questions

Marc has added some interesting material on his blog on AecoSim settings.

We are working on a project with the following settings:

Resolution: 10000 per Meter

Solids Working Area: 429.496 Kilometers

0,0,0 is about 81 km away from the centre of the project.

Both seem to be well above the recomendations suggested in Marc's blog above:

Resolution: 10000 per MM

SWA 4.29km

Q1: Is the SWA is centred on the Design Cube? If so should we be moving the DC centre closer to the project footprint? Is this done by using "GO=" ?

Q2: Should we be changing the resolution/SWA mid stream? What happens if we need to reference some 'infrastructure-scale' models? Will referencing using Coincident World take care of this?