AECOsim Drawing Model Opaque Fill

Question

Hi, 
 I tried drawing a opaque fill (eg. -500 priority) under a elevation Drawing Model (eg. 0 priority). However, the elevation Drawing Model seems to come with a white fill that does not recognise priority but only recognise the references sequence. 
 Is there a way around this?

Mark Holloway · Accepted Answer

Another alternative is to change the Visible Edge setting of the DV to Cached Visible Edge. 
 This will render the DV as simple lines without fills - you should then be able to place the fills with a priority behind the lines. The view's no longer dynamic but can be updated when required - given your applying 2D colour this isn't likely to be a major problem. 
 Mark

Tzeh Bin Cheong · Answer

Mark, 
 It works! thanks.

T_Wollet · Answer

Tzeh, 
 Have you tried adjusting the Reference Sequence? Since a drawing model is 2D the filled shape you drew is coplanar with the drawing model. I believe that priority only prioritizes within geometry within the same DGN file. You can change the sequence from the Reference Dialog via the Settings (pull-down menu) > Update Sequence. 
 I hope this helps, 
 Travis