How to add a Step in an existing Building View?

Christian,

I don't have time to include screen captures right now, but hopefully I can explain in a way that they are not needed.

1. In the 3D model where you created the saved view to update, create a new clip volume that has the step that you want (like you showed in your second image).
2. Apply the Saved View that you want to update to the view that has the clip volume that you want to use, except turn off the option to apply the Clip Volume from the Saved View when you apply the view.  This will apply all of the settings from the Saved View, except the Clip Volume.
   1. From the Saved View dialog, double-click on the name of the view that you want to apply, the Apply Saved View dialog will open.  Turn Off the option for Clip Volume, the rest of the options should be on.
3. Your active view should now be setup the way that you want your Saved View to be displayed.  Update the Saved View from the Active View
   1. From the Saved View dialog, select the view that you want to update, then select the Update Saved View Settings icon (at the top of the dialog with the blue diskette, next to Create Saved View) and then left-click in the view to update from.  Note that if you rotated your view that you are updating from to verify that the step is there make sure that you have the "Update Camera Position" option turned OFF before left-clicking in the view.

I hope this helps.  Let me know if something is unclear.

-Travis

Hi Travis,

I hope this doesn't mean that they are not going to add the step feature in Place Plan Callout tool.

John K.

Hi Travis,

I hope this doesn't mean that they are not going to add the step feature in Place Plan Callout tool.

John K.

You can add a step to the plan, but just using the right-click > Create Step option after it is created.

-Travis

I know you can do that for sections but I don't get that option for plans.  Am I missing something?

John K.

Before you create the drawing, but while you have a fitted clip volume applied to the view, right-click on the clip volume boundary and choose Create Step.

-Travis