I cant see the cut pattern in section of concrete , what is the possibilty?
Could be something as easy as scale. When I make patterns I have a typical element that I work with a 1' cube that I see elevation, rendered iso and section. This way I can check that it will work
Ustn since 1988SS4 - i7-3.45Ghz-16 Gb-250/1Tb/1Tb-Win8.1-64bEric D. MilbergerArchitect + Master Planner + BIMSenior Master Planner NASA - Marshall Space Flight CenterThe Milberger Architectural Group, llc
Play with your pattern scale. I think that may be it.
where is the cell file for the pattern?
really i dont understand why this happened , there is no direct solution for this kind of problem
It appears that you have been using Place Linear Form. If you use this you need to apply Part and a Family to that particular object.
When I select the wall you have created and go to "Element Information > Identification > Open Dataset Explorer to Active Part" nothing shows up. This indicates that part/Family have not been applied to that object yet and that is why you are not seeing anything.
I have uploaded my file too so you can have a look.
4075.11 - Copy.dgn
No I select wall componenet as family and concrete as part before .
Guys I changed the parts files to the original files nothing change this drive me crazy ,, any help "very important "
SOmthing stranged happened while Iam trying on Nasir file the pattern appeared in the secion but still is not in other new files
see the attachment
this my file
Most likely what occurred with Nasir file is when he opened file, it found missing concrete pattern.
When a pattern is used in part/family, it is copied into file as a shared cell and stored
along with other elements. Therefore when you open his file the pattern is found.
But your other files cannot find it. This definitely suggests it can't find pattern
when files are opened on your laptop.
When I opened your original file on my computer, pattern showed fine.
I located "concrt" pattern in a file called archpa.cel.
Make sure this file is in folder locations pointed to by configuration variable MS_CELL.
HTH's
Tom
Tdanner001, in my file I actually created a new Form and assigned Part/Family to it. When I opened dweib's file I could not see the pattern for concrete either as dweib did not assigned the Part/Family properly, the pattern is not missing.
I have attached a video how to assign Part/Family to the Linear Free Form.
Nasir,
I see in your video that concrete part is not in your workspace.
If assigned part is missing this would definitely keep pattern from showing.
Using dweib's earlier dataset image, it indicated that part/family assigned to form does exist in his workspace.
In Bentley's Delivered workspace for US and in my workspace the part;/family assigned in file also does exist.
Have you modified workspace to remove wall component:concrete?
Or maybe delivered regional dataset you are using doesn't contain this part.
Nice video by the way. What are you using?