Hello,
I recently installed V08.11.09.747.
The intersection snap is not working, not in the multi-snap or in the stand-alone snap.
Sincerely,
Wim
Are you sure there is an intersection between the elements? It seems to work just fine on lines in the same plane so it can't just generally be broken. What are you trying it on and with what command?
Koert,
It works on everything, except on Triforma and Architectural forms.
The same for the short cut "ALT-LMB", does not work on Triforma and Architectural forms.
Checking this I have found that where two walls that cross one another the intersection is not identified. This appears to be a defect, I have filed TR 99487.
Is this the case that you have run into?
When the junction is cleaned up you have keypoints to snap to so there is a way forward in production where cleaning up is a natural part of the BIM process.
Please tell us more about "short cut "ALT-LMB", does not work on Triforma and Architectural forms", what does not work?
Marc
Answer Verified By: wysiwyg
Marc,
When you hold down the ALT key and simultaneously left-mouse-click on an element in your design, all the attributes of that selected element becomes active.
It used to work on Triforma forms but not in the latest build anymore.
With e.g. Place Wall on a few different newly placed Walls then it works (Like with Place Slab, on slabs), but on SS4 files it tends to crash the application from time to time, not sure why.
Wim,
Please check that the button assignments are correct, Workspace menu > button assignments...
Is 'match attributes fromcursor' assigned to Alt+ Data?
Marc, if you use alt+data (using the place wall command) on a wall without datagroup information (part assigned but no datagroup info), does ABD crash for you too?
Koert, Not sure what you mean by no DataGroup info, the Wall Tool is integrated with the DataGroup? I don't get a crash when using Alt+Data.
Koert, assuming you are trying to use "match attributes fromcursor" using the button assignments and not the "Match" option available on place wall dialog?
If you have a wall generated with the Place Truss options, then the "walls" are firstly not on the right level and don't have DataGroup Info (only family/part). Alt+Data on a non-DG Wall will crash with the Place Wall tool active.
Not all Walls are "DG Walls" yet, or were placed with the Place Wall tool.
Ungraceful exits just shouldn't happen.
@Pradnya Tatke : yes Alt+data, the Match option the the place Wall dialog says "no datagroup data found", alt+data crashes the application