• scheduling of pipework lengths and fittings

    I am using AECOsim SS6 (08.11.09.829) is it possible to get a schedule of pipework, lengths, diameter, bends fittings etc and export it to excel?
  • Need help with Frame Builder?

    Hi Folks Need help with Frame Builder? How I get an opening in a sandwich wall (25cm concrete, 18cm insulation, 3cm air, 1 cm composite wall), if I create the window over Frame Builder ? What is wrong in the frame builder definition (see PDF…
  • Re: Centerline Definition of Part not working.

    I did find that the Custom Line I created that combined a line and points. Well the line of JUST dashes follows the width command where previously the points did also. Again, is it maybe a setting on the points? First picture has width off and 2nd…
  • Work with color in sheets

    Hi Folks Work with color in sheets (pic see attached) Q: How I can work with color that the façade grid witch is on a separate level is visible? Q: It is possible to organize different levels of information that are visible on separate levels…
  • Move an ISO section reference in a plot sheet, entire 3D model is visible

    Hi Folks Move an ISO section reference in a plot sheet, entire 3D model is visible If I move an ISO- section (pic 1) in a plot sheet, so I see the entire model (pic 2)! Is that maybe a bug? Q: is this common, or can I avoid this? …
  • How I can avoid, exasperating and senseless pop up information in 3D model as well as in a sheet ?

    Hi Folks On a sheet I’d like to draw a grid for the façade in 2D. But always information of the wall pops up and colored pops up too. That is exasperating! (pic see attached) Q: How I can avoid, exasperation and senseless pop up information…
  • Datagroup explorer AECOSIM

    Hi. We works on BA with V8I select 3. not very good. so we are waiting for aecosim... in french. I have already aecosim and begin to look at it. I have the version 225. I have read, and i note, that when we modify a parametric cell with the edit…
  • Reduce building information in section and elevation

    Hi Folks Reduce building information in section and elevation If I create a section or elevation, there is senseless information behind a visible line (dashed line). Q: How I can organize, that the section or elevation shows only the important…