• Compound wall problem...

    Ok here's my problem: So I have learnt to create a new compound wall and then used this with the wall tool within the model... Now I go back into the dataset and edit this compound wall (i.e. add an additional leaf or edit a leaf thickness etc)…
  • Re: Working in 3D with BA, help please.

    Hi voa Bim I m agree with you. i want to make extraction of my DV (i don't use the DEM because of non calculated cells in V8I!!!). but how you extract your work ( DV in sheet) in 2D?? Hi Damon Wath you describe is, i think, the best way for…
  • Re: PB with extraction DEM

    No sorry, i don't know. no Knowledge in program. I have just make a config from V82004 to V8I and make some basics macro. i am just a little Draftsman who have pb to work in 3D because somethings (i expose that in a message before) that work in triforma…
  • Re: Centerline Definition of Part not working.

    I did find that the Custom Line I created that combined a line and points. Well the line of JUST dashes follows the width command where previously the points did also. Again, is it maybe a setting on the points? First picture has width off and 2nd…
  • Beta 2 - AECOsim Building Designer V8i (SELECTseries 3) Technology Preview

    I am pleased to announce that we have posted AECOsim Building Designer V8i (SELECTseries 3) Technology Preview (Beta 2) (v08.11.09.147) to SELECTservices: Downloads/My SELECT CD . This release can be found on SELECTservices by setting the Product “AECOsim…
  • Re: BV, DV and detail of design

    Hi i have read your messages and allow me to ask a question (SS2 + Architecture). In V8 2004, i have use DEM and it was very long to calculta my 2d. we are going to use V8I SS2. we have remake our config. We have pb to make extraction with the DEM…
  • Urgent : Crossing from Triforma to V8I + ARCHITECTURE

  • Re: PB with extraction DEM

    Hi emilberger Today i have expose my pb to Bentley and i hope some answer. So the general pb is how to work in 3D in architecture. Make a draw in 3d, no pb (or not yet..lol no). But the pb is to make extraction. With the DEM, many cells are not…
  • How I can avoid, exasperating and senseless pop up information in 3D model as well as in a sheet ?

    Hi Folks On a sheet I’d like to draw a grid for the façade in 2D. But always information of the wall pops up and colored pops up too. That is exasperating! (pic see attached) Q: How I can avoid, exasperation and senseless pop up information…
  • URG : Problems crossing TRIFORMA to Bentley ARCHITECTURE

  • Re: Problems running the latest Mechanical V8XM and V8i with Microsoft 7 PRO

    Unknown said: Mark, do you anything similar to this? We recently overhauled and set up a new V8i workspace on the server and it is almost completely read only with the exception of a few files/folders such as the metadata folder within the BBES…
  • Bentley Architecture vs Revit vs Archicad

    Hi I am a long time MicroStation user currently reviewing a number of the leading BIM platforms out there - namely Bentley Architecture, Revit, & Archicad. Now I am not a 'die-hard' Bentley fan and so my remit is to simply try and evaluate each…
  • Datagroup explorer AECOSIM

    Hi. We works on BA with V8I select 3. not very good. so we are waiting for aecosim... in french. I have already aecosim and begin to look at it. I have the version 225. I have read, and i note, that when we modify a parametric cell with the edit…
  • Reduce building information in section and elevation

    Hi Folks Reduce building information in section and elevation If I create a section or elevation, there is senseless information behind a visible line (dashed line). Q: How I can organize, that the section or elevation shows only the important…
  • Re: Working in 3D with BA, help please.

    Hi Danny Cooley Yes i have try to merge with the "visible edge option" but there is a bug on some hidden line (when i make a circle hole in a form). i'm waiting for bentley for that... i have read many many articles on DV and Architecture but nothing…
  • Door bubbles replicating

    Hello, Need help with the door schedule bubbles on my floor plan in Bentley Architecture. I have noticed that almost everytime that I return to my "floor plan" saved view (model) after making changes in my "Design Model", that there are additional…
  • Drawing Extractions in DEM

    I have a problem with my cuts in DEM, the fill in my cuts is displaced with 2mm up and 1 mm to the left. This is only happening when I have the Transpose to XY Plane" box checked and its only occurring in the section cuts, the plane cuts is fine. But…