• Re: Custom wall properties.

    Jana, This document has exactly what you need. It will tell you how to create a new custom property definition (in Appendix 1) and then add it to the walls DataGroup Catalog. How to Add DataGroup types and Catalog Items to your dataset. BE Communities…
  • Re: Centerline Definition of Part not working.

    I did find that the Custom Line I created that combined a line and points. Well the line of JUST dashes follows the width command where previously the points did also. Again, is it maybe a setting on the points? First picture has width off and 2nd…
  • Extraction Workflow Architecture V8i - Forward Part mapping in a group model

    A DEM drawing definition in v8i uses Forward Part Mapping. Any parts defined for forward mapping that are in a reference attachment are not re-symbolized as expected... However, If I open the same group model and part mapping file on XM the drawing…
  • How I can avoid, exasperating and senseless pop up information in 3D model as well as in a sheet ?

    Hi Folks On a sheet I’d like to draw a grid for the façade in 2D. But always information of the wall pops up and colored pops up too. That is exasperating! (pic see attached) Q: How I can avoid, exasperation and senseless pop up information…
  • Door bubbles replicating

    Hello, Need help with the door schedule bubbles on my floor plan in Bentley Architecture. I have noticed that almost everytime that I return to my "floor plan" saved view (model) after making changes in my "Design Model", that there are additional…