• PB with extraction DEM

    Hi i have a pb when i extract. i'am going to migrate from V8 2004 + TRIFORMA to 8I + Arhitecture. My pb is that the DEM don't calculate me some cells and i don't know why. I attach a file with some cells and a drawing def. This cells are calculated…
  • 2D Door Swings not printing

    OK, I figured out the delivered content in Bentley Building Suit V8i has the 2D door swings as construction elements so they do not print unlease I print all my constructions. 1. Has Bentley fixed this problem? Is there new .paz files to download?…
  • Re: PB with extraction DEM

    No sorry, i don't know. no Knowledge in program. I have just make a config from V82004 to V8I and make some basics macro. i am just a little Draftsman who have pb to work in 3D because somethings (i expose that in a message before) that work in triforma…
  • Re: Parking Ramp

    Vicente- One issue you will run into is the top of the ramp terminating at an angle. You can see this in Sandeep's image. Obviously, this is not going to meet a parking deck in an acceptable manner. To resolve this, you will need to play with the …
  • Washed out animation images

    Hello, I am experiencing very strange output images from an animation sequence that I am recording. Near the end of a fly-thru that I am creating the output images are all of a sudden coming out "very bright and washed out". I have not changed any…
  • Re: BV, DV and detail of design

    Hi i have read your messages and allow me to ask a question (SS2 + Architecture). In V8 2004, i have use DEM and it was very long to calculta my 2d. we are going to use V8I SS2. we have remake our config. We have pb to make extraction with the DEM…
  • Re: PB with extraction DEM

    Hi emilberger Today i have expose my pb to Bentley and i hope some answer. So the general pb is how to work in 3D in architecture. Make a draw in 3d, no pb (or not yet..lol no). But the pb is to make extraction. With the DEM, many cells are not…
  • How I can avoid, exasperating and senseless pop up information in 3D model as well as in a sheet ?

    Hi Folks On a sheet I’d like to draw a grid for the façade in 2D. But always information of the wall pops up and colored pops up too. That is exasperating! (pic see attached) Q: How I can avoid, exasperation and senseless pop up information…
  • Preparing the model for Navisworks building sequencing.

    Okay folks Our client requires our model for use in Navisworks, where they intend to sequence the build. They are asking for a notional grid of some kind which Navisworks can read and then chop the building (the brickwork for example) into parts/cubes…
  • Visible lines from different floors are visible in 3D model and elevation (How i can avoid or fix this issue)

    Hi Folks, how I can avoid, that in 3D model is a visible line from different floors (blue circle)! Can I erase this line? How I can fix this problem? By the way: How you would create an fassade raster (sandwitch elements> renobond…
  • URG : Problems crossing TRIFORMA to Bentley ARCHITECTURE

  • Reduce building information in section and elevation

    Hi Folks Reduce building information in section and elevation If I create a section or elevation, there is senseless information behind a visible line (dashed line). Q: How I can organize, that the section or elevation shows only the important…