• Re: Parking Ramp

    Vicente- One issue you will run into is the top of the ramp terminating at an angle. You can see this in Sandeep's image. Obviously, this is not going to meet a parking deck in an acceptable manner. To resolve this, you will need to play with the …
  • How I can avoid, exasperating and senseless pop up information in 3D model as well as in a sheet ?

    Hi Folks On a sheet I’d like to draw a grid for the façade in 2D. But always information of the wall pops up and colored pops up too. That is exasperating! (pic see attached) Q: How I can avoid, exasperation and senseless pop up information…
  • Visible lines from different floors are visible in 3D model and elevation (How i can avoid or fix this issue)

    Hi Folks, how I can avoid, that in 3D model is a visible line from different floors (blue circle)! Can I erase this line? How I can fix this problem? By the way: How you would create an fassade raster (sandwitch elements> renobond…
  • Datagroup explorer AECOSIM

    Hi. We works on BA with V8I select 3. not very good. so we are waiting for aecosim... in french. I have already aecosim and begin to look at it. I have the version 225. I have read, and i note, that when we modify a parametric cell with the edit…
  • Reduce building information in section and elevation

    Hi Folks Reduce building information in section and elevation If I create a section or elevation, there is senseless information behind a visible line (dashed line). Q: How I can organize, that the section or elevation shows only the important…