• Can’t Mix MicroStation with Bentley Architecture???

    We have encountered an interesting limitation between MicroStation and Bentley Architecture. We have implemented annotation scale along with 1:1 sheet models. For the most part, it has been working great. However, it does not work with space (room) labels…
  • 2D Door Swings not printing

    OK, I figured out the delivered content in Bentley Building Suit V8i has the 2D door swings as construction elements so they do not print unlease I print all my constructions. 1. Has Bentley fixed this problem? Is there new .paz files to download?…
  • Re: PB with extraction DEM

    No sorry, i don't know. no Knowledge in program. I have just make a config from V82004 to V8I and make some basics macro. i am just a little Draftsman who have pb to work in 3D because somethings (i expose that in a message before) that work in triforma…
  • Re: BV, DV and detail of design

    Hi i have read your messages and allow me to ask a question (SS2 + Architecture). In V8 2004, i have use DEM and it was very long to calculta my 2d. we are going to use V8I SS2. we have remake our config. We have pb to make extraction with the DEM…
  • Hatching Association for Walls

    Hi i'm wondering how to assign Hatching patterns to walls so in a Floor plan view the walls will appear hatched. It needs to be associated with the walls so when a change is made to the walls the hatching also changes. I'm using just the default wall…
  • Door swings etc. disappear after .DWG conversion

    Hi all, I've noticed after creating a floor plan layout and converting the .dgn file to .dwg., the door swing for all the doors disappeared and are not apart ofthe file. Any suggestion on what I might have missed in the conversion process ? Thanks…
  • Re: PB with extraction DEM

    Hi emilberger Today i have expose my pb to Bentley and i hope some answer. So the general pb is how to work in 3D in architecture. Make a draw in 3d, no pb (or not yet..lol no). But the pb is to make extraction. With the DEM, many cells are not…
  • How I can avoid, exasperating and senseless pop up information in 3D model as well as in a sheet ?

    Hi Folks On a sheet I’d like to draw a grid for the façade in 2D. But always information of the wall pops up and colored pops up too. That is exasperating! (pic see attached) Q: How I can avoid, exasperation and senseless pop up information…
  • Preparing the model for Navisworks building sequencing.

    Okay folks Our client requires our model for use in Navisworks, where they intend to sequence the build. They are asking for a notional grid of some kind which Navisworks can read and then chop the building (the brickwork for example) into parts/cubes…
  • URG : Problems crossing TRIFORMA to Bentley ARCHITECTURE

  • Datagroup explorer AECOSIM

    Hi. We works on BA with V8I select 3. not very good. so we are waiting for aecosim... in french. I have already aecosim and begin to look at it. I have the version 225. I have read, and i note, that when we modify a parametric cell with the edit…
  • Plumbing fixtures don't appear in elevation / section views

    Hello, I've created restrooms in my design model that are populated with the plumbing fixtures (toilet, sink etc.). The "saved" floor plan view looks fine, but when I create a section view of the room the fixtures do not show up in the sectional view…
  • Reduce building information in section and elevation

    Hi Folks Reduce building information in section and elevation If I create a section or elevation, there is senseless information behind a visible line (dashed line). Q: How I can organize, that the section or elevation shows only the important…
  • Door bubbles replicating

    Hello, Need help with the door schedule bubbles on my floor plan in Bentley Architecture. I have noticed that almost everytime that I return to my "floor plan" saved view (model) after making changes in my "Design Model", that there are additional…