• PB with extraction DEM

    Hi i have a pb when i extract. i'am going to migrate from V8 2004 + TRIFORMA to 8I + Arhitecture. My pb is that the DEM don't calculate me some cells and i don't know why. I attach a file with some cells and a drawing def. This cells are calculated…
  • 2D Door Swings not printing

    OK, I figured out the delivered content in Bentley Building Suit V8i has the 2D door swings as construction elements so they do not print unlease I print all my constructions. 1. Has Bentley fixed this problem? Is there new .paz files to download?…
  • Practicalities that have been overlooked in Bentley Architecture

    I am hoping that this post will grow to address some of the components of Ustn / BA that are in need of minor tweaks to adjust their functionality in a way that they become more efficient operationally. I am sure many users have such ideas relating to…
  • Can I automatically generate contour lines from a 3D ground (Mesh) with V8i?

    Hi everybody! Does anybody know if there is a way to automatically generate contour lines froma a 3D Mesh? Would be perfect to get automatically the lines and the altitude text. I have a 3D model of all the region's territory (precise and with the…
  • Re: PB with extraction DEM

    No sorry, i don't know. no Knowledge in program. I have just make a config from V82004 to V8I and make some basics macro. i am just a little Draftsman who have pb to work in 3D because somethings (i expose that in a message before) that work in triforma…
  • Need help with Frame Builder?

    Hi Folks Need help with Frame Builder? How I get an opening in a sandwich wall (25cm concrete, 18cm insulation, 3cm air, 1 cm composite wall), if I create the window over Frame Builder ? What is wrong in the frame builder definition (see PDF…
  • Re: Parking Ramp

    Vicente- One issue you will run into is the top of the ramp terminating at an angle. You can see this in Sandeep's image. Obviously, this is not going to meet a parking deck in an acceptable manner. To resolve this, you will need to play with the …
  • Urgent : Crossing from Triforma to V8I + ARCHITECTURE

  • Work with color in sheets

    Hi Folks Work with color in sheets (pic see attached) Q: How I can work with color that the façade grid witch is on a separate level is visible? Q: It is possible to organize different levels of information that are visible on separate levels…
  • Re: PB with extraction DEM

    Hi emilberger Today i have expose my pb to Bentley and i hope some answer. So the general pb is how to work in 3D in architecture. Make a draw in 3d, no pb (or not yet..lol no). But the pb is to make extraction. With the DEM, many cells are not…
  • How I can avoid, exasperating and senseless pop up information in 3D model as well as in a sheet ?

    Hi Folks On a sheet I’d like to draw a grid for the façade in 2D. But always information of the wall pops up and colored pops up too. That is exasperating! (pic see attached) Q: How I can avoid, exasperation and senseless pop up information…
  • Preparing the model for Navisworks building sequencing.

    Okay folks Our client requires our model for use in Navisworks, where they intend to sequence the build. They are asking for a notional grid of some kind which Navisworks can read and then chop the building (the brickwork for example) into parts/cubes…
  • Visible lines from different floors are visible in 3D model and elevation (How i can avoid or fix this issue)

    Hi Folks, how I can avoid, that in 3D model is a visible line from different floors (blue circle)! Can I erase this line? How I can fix this problem? By the way: How you would create an fassade raster (sandwitch elements> renobond…
  • URG : Problems crossing TRIFORMA to Bentley ARCHITECTURE

  • Reduce building information in section and elevation

    Hi Folks Reduce building information in section and elevation If I create a section or elevation, there is senseless information behind a visible line (dashed line). Q: How I can organize, that the section or elevation shows only the important…
  • Why do my building views rasterize when I print?

    That is the question. I'm using Bentley Architecture V8i select series 2. I create a dynamic view (extraction from the 3D model) the line weights and hatches look okay, I live nest reference to a sheet but then when I print to PDF it automatically…