• Aecosim building designer selectseries 5

    I am looking for some basic viedos tutorials and learning programs for Aecosim building designer V8i select series 5. I found tutorials for Aecosim but these are for only connection edition. Any one have any idea or can guide me? Thanks in advanc…
  • Re: Datagroup explorer AECOSIM

    Thanks Andreas. Another questions. I have hear that PCstudio may be replace in the future ?? I've creating a paz cell, seems like rect penetrations for slab, but no the result as expected. i use Dynamic view to test it. with a top view…
  • Need help with Frame Builder?

    Hi Folks Need help with Frame Builder? How I get an opening in a sandwich wall (25cm concrete, 18cm insulation, 3cm air, 1 cm composite wall), if I create the window over Frame Builder ? What is wrong in the frame builder definition (see PDF…
  • Re: Centerline Definition of Part not working.

    I did find that the Custom Line I created that combined a line and points. Well the line of JUST dashes follows the width command where previously the points did also. Again, is it maybe a setting on the points? First picture has width off and 2nd…
  • Work with color in sheets

    Hi Folks Work with color in sheets (pic see attached) Q: How I can work with color that the façade grid witch is on a separate level is visible? Q: It is possible to organize different levels of information that are visible on separate levels…
  • How I can avoid, exasperating and senseless pop up information in 3D model as well as in a sheet ?

    Hi Folks On a sheet I’d like to draw a grid for the façade in 2D. But always information of the wall pops up and colored pops up too. That is exasperating! (pic see attached) Q: How I can avoid, exasperation and senseless pop up information…
  • Visible lines from different floors are visible in 3D model and elevation (How i can avoid or fix this issue)

    Hi Folks, how I can avoid, that in 3D model is a visible line from different floors (blue circle)! Can I erase this line? How I can fix this problem? By the way: How you would create an fassade raster (sandwitch elements> renobond…
  • Datagroup explorer AECOSIM

    Hi. We works on BA with V8I select 3. not very good. so we are waiting for aecosim... in french. I have already aecosim and begin to look at it. I have the version 225. I have read, and i note, that when we modify a parametric cell with the edit…
  • Reduce building information in section and elevation

    Hi Folks Reduce building information in section and elevation If I create a section or elevation, there is senseless information behind a visible line (dashed line). Q: How I can organize, that the section or elevation shows only the important…