• PB with extraction DEM

    Hi i have a pb when i extract. i'am going to migrate from V8 2004 + TRIFORMA to 8I + Arhitecture. My pb is that the DEM don't calculate me some cells and i don't know why. I attach a file with some cells and a drawing def. This cells are calculated…
  • sections with drawing extraction manager needs to be regenerated after every change

    Hi all, we draw with Bentley Architecture in 3D and then generate plan views for each floor we need and cross sections as well. In the previous version (XM) every section created with the drawing extraction manager was automatically updated after every…
  • Re: Sheets

    emilberger: This sould be valid for referencing BV or CV's also. True. If you're clipping reference files I don't think you should be seeing any extraneous lines, whether it's an extraction or a DV. However, if you're creating individual…
  • Re: levels used

    And just so you're aware... In the main DEM dialog, right next to the "Move Cut Plane" icon, is the "Sync Drawing Def" icon which will generate a DV based on the currently selected DEM definition. It's a nice way to make the transition, or just play with…
  • Re: PB with extraction DEM

    No sorry, i don't know. no Knowledge in program. I have just make a config from V82004 to V8I and make some basics macro. i am just a little Draftsman who have pb to work in 3D because somethings (i expose that in a message before) that work in triforma…
  • Urgent : Crossing from Triforma to V8I + ARCHITECTURE

  • Re: Project Setup?

    Your options for getting plans, sections, etc. from the models are Drawing Extraction Manager (DEM) and Dynamic Views (DVs). The Floor Manager can assist in both cases. The Floor Manager is a utility for defining "levels" in your project, for example…
  • Re: PB with extraction DEM

    Hi emilberger Today i have expose my pb to Bentley and i hope some answer. So the general pb is how to work in 3D in architecture. Make a draw in 3d, no pb (or not yet..lol no). But the pb is to make extraction. With the DEM, many cells are not…
  • Re: Why can I see through compound cells

    Yes... for whatever reason the issue seemed to be specific to the 8.11.5 release - the Compound Cell displays correctly in both XM and 8.11.7. To verify whether the cause is the same in your case, perhaps you can install the 8.11.7 beta to test? It does…
  • URG : Problems crossing TRIFORMA to Bentley ARCHITECTURE

  • PCS doors - How do you change the line style of the hinge/swing indicator?

    We noticed that the PCS doors (HM and wood) have a hinge/swing indicated drawn for use when extracting an elevation. How do you change the style of this? We would like for it to be dashed while the rest of the door elevation remain a solid line. T…