• PB with extraction DEM

    Hi i have a pb when i extract. i'am going to migrate from V8 2004 + TRIFORMA to 8I + Arhitecture. My pb is that the DEM don't calculate me some cells and i don't know why. I attach a file with some cells and a drawing def. This cells are calculated…
  • edit form base not working

    Hello all, I have just started working with V8i (8.11.05.46) and am having problems with this command. I have drawn a slab form, using the place slab form tool. Now I want to change it, using edit form base. This gives me the message: error…
  • Re: PB with extraction DEM

    No sorry, i don't know. no Knowledge in program. I have just make a config from V82004 to V8I and make some basics macro. i am just a little Draftsman who have pb to work in 3D because somethings (i expose that in a message before) that work in triforma…
  • Need help with Frame Builder?

    Hi Folks Need help with Frame Builder? How I get an opening in a sandwich wall (25cm concrete, 18cm insulation, 3cm air, 1 cm composite wall), if I create the window over Frame Builder ? What is wrong in the frame builder definition (see PDF…
  • Working in 3D with BA, help please.

    Hi all We are migrating from V82004+Triforma to V8I+architecture. To be short, i have already post some question there is two month and i'was ( and i'm) waiting for bentley's answer. In 2D we don't have many pb. We actually work with V8I in 2D but…
  • Re: BV, DV and detail of design

    Hi i have read your messages and allow me to ask a question (SS2 + Architecture). In V8 2004, i have use DEM and it was very long to calculta my 2d. we are going to use V8I SS2. we have remake our config. We have pb to make extraction with the DEM…
  • Urgent : Crossing from Triforma to V8I + ARCHITECTURE

  • Dimension, Text, Sheets to create an plot sheet

    Hi Folks I have a few question for create sheets to plot or print 1st question: Do I put the dimension, text and the tags (create space) in the seperate file (Ground floor , first floor) or in the Master Model? There are things was is importend…
  • Work with color in sheets

    Hi Folks Work with color in sheets (pic see attached) Q: How I can work with color that the façade grid witch is on a separate level is visible? Q: It is possible to organize different levels of information that are visible on separate levels…
  • Move an ISO section reference in a plot sheet, entire 3D model is visible

    Hi Folks Move an ISO section reference in a plot sheet, entire 3D model is visible If I move an ISO- section (pic 1) in a plot sheet, so I see the entire model (pic 2)! Is that maybe a bug? Q: is this common, or can I avoid this? …
  • Re: PB with extraction DEM

    Hi emilberger Today i have expose my pb to Bentley and i hope some answer. So the general pb is how to work in 3D in architecture. Make a draw in 3d, no pb (or not yet..lol no). But the pb is to make extraction. With the DEM, many cells are not…
  • Preparing the model for Navisworks building sequencing.

    Okay folks Our client requires our model for use in Navisworks, where they intend to sequence the build. They are asking for a notional grid of some kind which Navisworks can read and then chop the building (the brickwork for example) into parts/cubes…
  • URG : Problems crossing TRIFORMA to Bentley ARCHITECTURE

  • Reduce building information in section and elevation

    Hi Folks Reduce building information in section and elevation If I create a section or elevation, there is senseless information behind a visible line (dashed line). Q: How I can organize, that the section or elevation shows only the important…
  • VBA Program to Turn On/Off the Triforma 3D Setup Lock

    It is just good practice to use the floor manager to set-up your elevation working points, and so in general there is no need to be able to turn the Triforma locks on/off (ATFENV_3DSetup and ACS). But there are times when it can be a problem and it is…
  • Re: Working in 3D with BA, help please.

    Hi Danny Cooley Yes i have try to merge with the "visible edge option" but there is a bug on some hidden line (when i make a circle hole in a form). i'm waiting for bentley for that... i have read many many articles on DV and Architecture but nothing…
  • Why do my building views rasterize when I print?

    That is the question. I'm using Bentley Architecture V8i select series 2. I create a dynamic view (extraction from the 3D model) the line weights and hatches look okay, I live nest reference to a sheet but then when I print to PDF it automatically…