• Why is AECOsim Building Designer crashing?

    I work with Inox steel India , why is AECOsim Building Designer crashing on my PC?
  • BDL TOTAL LOADS WEIGHT IN OBD

    DEAR ALL, BEST
  • Aecosim building designer selectseries 5

    I am looking for some basic viedos tutorials and learning programs for Aecosim building designer V8i select series 5. I found tutorials for Aecosim but these are for only connection edition. Any one have any idea or can guide me? Thanks in advanc…
  • Need help with Frame Builder?

    Hi Folks Need help with Frame Builder? How I get an opening in a sandwich wall (25cm concrete, 18cm insulation, 3cm air, 1 cm composite wall), if I create the window over Frame Builder ? What is wrong in the frame builder definition (see PDF…
  • Re: Centerline Definition of Part not working.

    I did find that the Custom Line I created that combined a line and points. Well the line of JUST dashes follows the width command where previously the points did also. Again, is it maybe a setting on the points? First picture has width off and 2nd…
  • Drawing Composition / Create Plan View(s)

    Hello, I am trying to use the Create Plan tool in AECOsim Building Designer. Previously clips have been placed using the Clip Volume tool but for a series of floors it seems logical using the advanced tools provided. Floor Manager is nicely set…
  • Dimension, Text, Sheets to create an plot sheet

    Hi Folks I have a few question for create sheets to plot or print 1st question: Do I put the dimension, text and the tags (create space) in the seperate file (Ground floor , first floor) or in the Master Model? There are things was is importend…
  • Work with color in sheets

    Hi Folks Work with color in sheets (pic see attached) Q: How I can work with color that the façade grid witch is on a separate level is visible? Q: It is possible to organize different levels of information that are visible on separate levels…
  • Move an ISO section reference in a plot sheet, entire 3D model is visible

    Hi Folks Move an ISO section reference in a plot sheet, entire 3D model is visible If I move an ISO- section (pic 1) in a plot sheet, so I see the entire model (pic 2)! Is that maybe a bug? Q: is this common, or can I avoid this? …
  • AECOsim Building Designer - File Sizes?

    Hello, Can anyone explain why, when using dynamic views the file size of sheets and drawings get enormous? We are having files – and these do only contain references and there is not a single line drawn in it which get up to 100MB. We are using a lot…
  • Reduce building information in section and elevation

    Hi Folks Reduce building information in section and elevation If I create a section or elevation, there is senseless information behind a visible line (dashed line). Q: How I can organize, that the section or elevation shows only the important…
  • VBA Program to Turn On/Off the Triforma 3D Setup Lock

    It is just good practice to use the floor manager to set-up your elevation working points, and so in general there is no need to be able to turn the Triforma locks on/off (ATFENV_3DSetup and ACS). But there are times when it can be a problem and it is…