• Re: Working in 3D with BA, help please.

    Here an example ofa DV in "True hidden line" with the exact method. In green there is circle hole. and in red you see the hidden line missing. with the rapid metho, this line appear but too bad quality. Have you got the same pb
  • PB with extraction DEM

    Hi i have a pb when i extract. i'am going to migrate from V8 2004 + TRIFORMA to 8I + Arhitecture. My pb is that the DEM don't calculate me some cells and i don't know why. I attach a file with some cells and a drawing def. This cells are calculated…
  • Door Swings

    Does anyone know how I edit the 2D component (Drawing Symbol) of the doors. In the first instance I'd simply like to change the linestyle to a dash for the door and swing. I'd expected this could be acheived by changing one of the following family…
  • Re: Working in 3D with BA, help please.

    Hi voa Bim I m agree with you. i want to make extraction of my DV (i don't use the DEM because of non calculated cells in V8I!!!). but how you extract your work ( DV in sheet) in 2D?? Hi Damon Wath you describe is, i think, the best way for…
  • Re: PB with extraction DEM

    No sorry, i don't know. no Knowledge in program. I have just make a config from V82004 to V8I and make some basics macro. i am just a little Draftsman who have pb to work in 3D because somethings (i expose that in a message before) that work in triforma…
  • Drawing Composition / Create Plan View(s)

    Hello, I am trying to use the Create Plan tool in AECOsim Building Designer. Previously clips have been placed using the Clip Volume tool but for a series of floors it seems logical using the advanced tools provided. Floor Manager is nicely set…
  • Working in 3D with BA, help please.

    Hi all We are migrating from V82004+Triforma to V8I+architecture. To be short, i have already post some question there is two month and i'was ( and i'm) waiting for bentley's answer. In 2D we don't have many pb. We actually work with V8I in 2D but…
  • Re: BV, DV and detail of design

    Hi i have read your messages and allow me to ask a question (SS2 + Architecture). In V8 2004, i have use DEM and it was very long to calculta my 2d. we are going to use V8I SS2. we have remake our config. We have pb to make extraction with the DEM…
  • Urgent : Crossing from Triforma to V8I + ARCHITECTURE

  • Re: Building View - .dwg

    DGammie: So long as the BV is referenced into a drawing. If you export straight from the model, with a BV on, you will just export the whole model. Correct... When applying a BV to a 3D model, you'd still be saving a 3D model to DWG. So the output…
  • Error message when showing Callouts. "maximum dependency callback iterations exceeded"

    Has anyone experienced problems with Callouts and dynamic views when working outside "solid working area" or when the "global Origin" is moved in the Composition model? For example microstation tells me "maximum dependency callback iterations exceeded…
  • Re: PB with extraction DEM

    Hi emilberger Today i have expose my pb to Bentley and i hope some answer. So the general pb is how to work in 3D in architecture. Make a draw in 3d, no pb (or not yet..lol no). But the pb is to make extraction. With the DEM, many cells are not…
  • URG : Problems crossing TRIFORMA to Bentley ARCHITECTURE

  • AECOsim Building Designer - File Sizes?

    Hello, Can anyone explain why, when using dynamic views the file size of sheets and drawings get enormous? We are having files – and these do only contain references and there is not a single line drawn in it which get up to 100MB. We are using a lot…
  • Plumbing fixtures don't appear in elevation / section views

    Hello, I've created restrooms in my design model that are populated with the plumbing fixtures (toilet, sink etc.). The "saved" floor plan view looks fine, but when I create a section view of the room the fixtures do not show up in the sectional view…
  • Place Plan Callout, Create gap

    Is it not possible to "Create gap" on a Plan Callout? I dont get the same options when I right click on a plan callout that I do if I right click on a "Section Callout".
  • Re: Working in 3D with BA, help please.

    Hi Danny Cooley Yes i have try to merge with the "visible edge option" but there is a bug on some hidden line (when i make a circle hole in a form). i'm waiting for bentley for that... i have read many many articles on DV and Architecture but nothing…
  • How to change text size in Detailing symbol / Drawing Titles

    Hello all, I am trying to figure out how to change the default size of the text that automatically comes up in all of my detailing symbol bubbles etc. (sections, elevation, drawing title etc.) Without editing them manually. The text that comes up is…