• Problems with exporting to IFC

    Hi, I have a few problems with exporting to IFC. 1. After export to IFC there are additional elements that were not in the .dgn file 2. When inserting base plates, I used the mirror. All elements inserted using the mirror function were exported to IFC…
  • Custom Catalogue Items and Definitions

    I am creating some Custom Catalogue Items and adding custom definitions to the catalogue items. The steps I followed are as below. 1. Create New Definition File in Definition Editor. 2. Create Custom Properties under the new Definition File. 3…
  • Why element and cell disappear when export IFC 2x3 CV2.0, then how to solve?

    Hi OpenBuilding Forum, Lately when I use IFC 2x3 to export the model as deliver and cooperation model, then will happen element disappear. As the picture below. My model is ok in export IFC4, but when I export IFC2x3 cv2.0 that would happen geometric…
  • IFC GUID import/export

    When OBD exports to IFC, does it generate a GUID for each graphic element or component? When OBD imports from IFC, does it attach the IFC GUID to the equivalent DGN element or component? Note that I'm discussing the GUID used in IFC , not MicroStation…
  • RE: Pset and Floor Manager to IFC

    Hi Oskar, having set up your building's floors in Floor Manger: You should then be able to pick the correct floors (if the best fit is not correct) for each reference, the nested references to each floor will follow the master, so in this example…