Part L Calculation

Question

I have imported a Hevacomp project into Open Buildings energy simulator, when I run the Part L calculation I get a error stating HEPA-FILTER = 0, there are 3No. of these in the list and 1No. error stating 'bad reference GLASS' 
 Please can you advise on how to solve this. 
 Thanks

Shane Regan · Accepted Answer

Hi Maitiniyazi, 
 Thanks for letting us know. This confirms that you are definitely running on an outdated version. 
 The above has been resolved in the software in the current version. 
 Please install update 8 as shown here: 
 How to install OpenBuildings Energy Simulator - OpenBuildings | AECOsim | Speedikon Wiki - OpenBuildings | AECOsim | Speedikon - Bentley Communities

Shane Regan · Answer

Hello Steve, 
 It sounds like you may not be running on the latest version in that case - I understand that these errors ( shown here) were resolved in the Update7 Priority Build. 
 We would be more than happy to provide you with a link to this if you could please log an OpenBuildings Service Request here , requesting the Priority Build.

Shane Regan · Answer

Hello Steve, 
 Did installing the priority build resolve the "GLASS" issue? 
 In relation to the HEPA filter issue - developers have let me know that this will be resolved in the upcoming release of Update 8. For now you should be able to get around this by ticking default (for each room), as below:

Part L Calculation

Top Replies