We require the xml file from the Part L calculation to enable us to provide an EPC however the following error appears when we run the SBEM with level 4 complexity selected.
The program will run when level 3 is selected
Our assessor is trained to level 4
Thread moved to the Energy Simulation forum.
Hi Steve,
I have attempted to reproduce this here however it appears to work fine in my test cases. Could you please upload the Workset for the project to this link.
Shane Regan | Principle Building Performance Support Engineer
Thank you Steve, I can confirm the project has been received - we are inspecting this and will be in touch.
Thanks for sending that through. I have got the calculation to run here and EPC is generating, see below. To do so, I refreshed the calculation cache by running for one zone only (eg Zone 4 is a quick one) - if you do so and when compete select All Rooms once more the calculation should complete fine for you thereafter.
Shane
I have tried this on two projects but the Part L calculation will still not run when level 4 complexity is selected. Part L calculation will run fine when level 3 is selected. When one zone is selected Part L will still not run when level 4 is selected.
Regards
Steve