PartL error "Keyword out of range : PITCH = 180"

RE: PartL error "Keyword out of range : PITCH = 180"

Adon Emery — Wed, 05 May 2021 15:42:03 GMT

great thanks Shane.

Shane Regan — Wed, 05 May 2021 15:40:24 GMT

Hi Adon,

The issue was a wall surface in the ground floor open plan office - we have resolved this for you and I will email you the repaired project shortly.

Shane Regan — Wed, 05 May 2021 13:44:00 GMT

Thanks Adon, I will be in touch shortly.

Adon Emery — Wed, 05 May 2021 12:00:37 GMT

V1.16 is the most recent DGN

Shane Regan — Wed, 05 May 2021 11:31:56 GMT

Thanks Adon, looking at it now. There are quite a few DGN's in the Workset - can you please confirm the relevant one?

Adon Emery — Tue, 04 May 2021 14:40:11 GMT

Thanks Shane.

I've uploaded it now.

Shane Regan — Tue, 04 May 2021 14:33:50 GMT

Thanks Adon, if you could forward the project I will inspect it for you to see what the cause of this is, please upload sipped project folder to:

Adon Emery — Tue, 04 May 2021 13:47:28 GMT

Yes only this one at the moment.

Shane Regan — Tue, 04 May 2021 13:46:20 GMT

Hi Adon,

Is this error occurring in just this one project only?

Regards,

Shane