Wall Property Wrong

RE: Wall Property Wrong

Shane Regan — Thu, 06 Jan 2022 11:44:40 GMT

Hi Bake,

Walls will remain external and only be changed to partition if there is another room nearby, within the distance set in your Adjacent Tolerance setting below:

Adjacent Tolerance setting - OpenBuildings | AECOsim | Speedikon Wiki - OpenBuildings | AECOsim | Speedikon - Bentley Communities

So it would be worth checking that setting firstly. If you wished us to investigate this further we would need you to forward your project - if you wish to please let me know and I can send you an upload link.

RE: Wall Property Wrong

Maitiniyazi Bake — Thu, 06 Jan 2022 09:30:09 GMT

Hi Shane,

Good Morning, that solution (select properties, you will be able to change the surface type to exposed wall there) would work but time consuming when you have hundreds of wall to be fixed.

I still wonder why it happends such a problems though.

RE: Wall Property Wrong

Shane Regan — Thu, 06 Jan 2022 08:25:22 GMT

Hi Bake,

Good morning. I'm not too sure how this might have occurred- was there anything strange that preceded this? In any case, if you right click on the Partition in the project tree, select properties, you will be able to change the surface type to exposed wall there.