Hi
I have the following problems with my Part L 2013 which I don't seem to be able to rectify. Under Criterion 2 the Wall element is shown failing, it's Partition 8 (which is wrong in itself) - I've been through each room on screen and the paper printouts but can find no error.
Anyone got any ideas or is my program just corrupt ?
Cheers
Hi Graham, nothing wrong with the program - under certain conditions partitions are taken into account as part of the SBEM check for criterion 2. Please find info here:
BRUKL Report - Internal Surfaces in U-Value check - OpenBuildings | AECOsim | Speedikon Wiki - OpenBuildings | AECOsim | Speedikon - Bentley Communities
Shane Regan | Principle Building Performance Support EngineerHevacomp to OpenBuildings - A complete guide for every user | Bentley Communities
Thanks Shane
I thought I'd gone through all this and checked it as per the article you refer too but obviously I've missed something. I'll go back and check again
Cheers G
No worries at all Graham, it can be a tricky one to narrow down!
I can have a look too if you need? I can log a Service Request and get the project from you if you like?
Actually that would be helpful, I've actual had other problems with this file but slowly over a number of days they've rectified themselves apart from this one issue.